The WFM5 has a Water Drinking Fountain anda Glass/Bottle Filler. It is mains connected and can be fitted with a Carbon Filter to remove the taste and smell of Chlorine. The waste water is removed via a 32mm diameter Flexible and extendable waste pipe.  Water Flow controlThe Water Fountain is rated to supply 1.7 litres per minute. An automatic self regulating control is fitted to overcome varying mains pressure. Cabinet

Polished stainless steel top. Spray coated metal side panels. Easily removable front panel for ease of filter exchange & servicing.

Refrigeration System

Non Toxic, non flammable and environmentally sympathetic R-134a refrigerant. The refrigerant flow is controlled by a capillary tube with no moving parts. To  provide for maximum heat exchange (and increase cold water capacity) a suction line is fitted to remove the heated air.

 Cooling System

Hard drawn copper and tin plated 1.5 Litre cold water tank with chilling chamber to meet peak demand..

Cooling Capacity 19 l per hour  to 10 C

from water inlet temperature of         26.7 C

and ambient temperature of             32.2 C

The hourly Cooling Capacity increases exponentially if the Incoming water temperature is less than 26.7 C, as will be the case in the UK.

Compressor & Condenser

Compressor:    1/5 h.p. capacity 230 watt

Condenser:     Copper tube and expanded aluminium 

finish

 Power supply

240 Volt, 50Hz. 3 pin plug and 200 cm power cord.

 Dimensions & Weight

Dimensions:     H 110cm  x W 35cm x  D 35cm

Weight:            32 Kg

See our Machine Installation pages for exact installation specifications and requirements.